Body Bundle

Dual Microcurrent Face & Body Toning Device: Before use, ensure that your face and body are clean and free of makeup. Then, apply a suitable serum or moisturizer to your face or body. This is important for optimal transfer of microcurrent impulses to the skin. For best results, use a serum or moisturizer that remains moist on the skin and has a pH as neutral as possible. To switch on, press and hold the On/Off/Mode button. The device automatically starts in face mode. To switch to body mode, press and hold the button again until the corresponding indicator changes. The intensity of the microcurrent impulses can be adjusted by briefly pressing the button. Depending on the selected level, one to three dots will appear on the display. Lightly place both metal spheres on the skin. A frequency of 8 Hz is emitted in the center of the spheres, while the outer area operates at 40 Hz. Slowly and gently glide the device over the skin for about 20 seconds to 3 minutes per skin area. A slight tingling sensation and gentle muscle contractions are normal. If the application is uncomfortable or painful, the intensity should be reduced, as too high a level can negatively affect results. In face mode, the device can be used along the jawline, cheekbones, and forehead. Special caution is advised in the sensitive area around teeth, eyes, and temples. In body mode, the device is suitable for arms, legs, and the upper body. Do not use near the heart. After use, press and hold the button again to switch off the device. Then clean with a damp cloth.

LED Face & Body Smoother: First, apply your preferred moisturizer, serum, or lotion to the skin. Do not use in combination with serums that contain light-sensitive ingredients or potential photosensitizers, such as Vitamin C, AHAs, BHAs, essential oils, benzoyl peroxide, salicylic acid, or retinoids. To switch on, press and hold the On/Off/Mode button. The device automatically starts in red light mode with microcurrent intensity level 1. By briefly pressing the On/Off/Mode button, you can switch between the three microcurrent intensity levels. After cycling through all three intensity levels, you can select the different light modes. The most suitable mode depends on individual needs and the device settings. After selecting the desired mode, perform a 10-minute application, following the recommended device movements. To switch off, press and hold the On/Off/Mode button again.

Dual Microcurrent Face & Body Toning Device: Safety Information: Using the microcurrent device in any way other than described in these instructions will void the warranty and may result in serious injury. The STYLPRO™ Dual Microcurrent is an electrical device. To avoid the risk of electric shock, the following safety instructions must be observed: * Do not allow the device to get wet or immerse it in water. * Do not clean electrical components with water or other liquids. * Do not touch the device or controls with wet hands. * Do not use the device if it has been dropped, stored outdoors, or has come into contact with water or other liquids. * Do not modify the device or attempt to repair it. It contains no user-serviceable parts. * Do not store or use the device at temperatures above 54 °C. Warnings: 1. Read all instructions carefully before first use. 2. If unusual skin reactions occur during or after use, seek medical advice. 3. To protect against electrical hazards, do not use the device while bathing or showering. 4. Do not use the device if it is not functioning properly or has been damaged. Repairs may only be carried out by authorised specialists. 5. Use the device exclusively as described in these instructions. The use of non-recommended accessories can cause hazards. 6. Do not place the product near heat sources such as radiators or stoves, and do not place it on soft surfaces such as beds, as it may overheat. 7. Keep the device away from corrosive liquids. 8. Do not share the product with other people. 9. Do not use the device while charging. 10. Do not store in places where it can fall into bathtubs or sinks. If the device falls into water, immediately unplug it and do not reach into the water. 11. Do not apply directly over or near metal implants, fillings, braces, or other metallic dental work, as this may cause discomfort, pain, or a metallic taste.

LED Face & Body Smoother: Safety Information: 1. This device is intended for indoor use and home application only. 2. Before use, medical advice should be sought if any of the following situations apply: metal implants, recent surgery, medical implants such as pacemakers, pregnancy or breastfeeding, nausea, headaches, fever, skin conditions, burns or redness, fractures, cancer or other malignant diseases, osteoporosis, or mental illness. 3. Suitable for adults only. Do not use on infants, children, pets, or individuals with limited physical or mental capabilities without supervision. This is not a toy. 4. If the STYLPRO™ LED Face & Body Smoother is not functioning properly or is damaged, discontinue use immediately and contact STYLPRO™ customer service. 5. Use LED light with caution. Prolonged or direct exposure to the eyes can cause damage. The LEDs are not replaceable. 6. Do not use on broken, irritated, swollen, sunburned, or numb skin, or on areas with bruises, inflammation, or existing skin conditions. 7. Do not look directly into the LED lights. Electrical Safety Information: Using the device in any way other than described in these instructions will void the warranty and may result in serious injury. The STYLPRO™ LED Face & Body Smoother is an electrical device. To avoid the risk of electric shock, the following instructions must be observed: * Do not allow the device to get wet or immerse it in water. * Do not clean electrical components with water or other liquids. * Do not touch the device or controls with wet hands. * Do not use the device on damp or wet skin. * Do not use the device if it has been dropped, stored outdoors, or has come into contact with water or other liquids. * Do not modify the device or attempt to repair it yourself. It contains no user-serviceable parts. * Do not use or store the device at temperatures above 54 °C. Warnings: 1. Read all instructions carefully before first use. 2. If unusual skin reactions occur during or after use, seek medical advice. 3. Do not use the device while bathing or showering. 4. Do not continue to use a damaged device or one that is not functioning properly. Repairs may only be carried out by qualified specialists. 5. Use the device exclusively for its intended purpose. 6. Do not place near heat sources such as radiators or stoves, and do not place on soft surfaces such as beds, as it may overheat. 7. Keep the device away from corrosive liquids. 8. Do not share the product with other people. 9. Do not use the device while charging. 10. Do not store in places where it can fall into bathtubs or sinks. If it falls into water, immediately unplug it and do not reach into the water. Battery Information: The product contains a lithium-ion battery. Do not open, crush, heat above 60 °C, or incinerate. Do not short-circuit. If the battery is severely deformed, stop using it immediately. Keep small battery cells out of reach of children, as ingestion can cause severe internal injuries or death within two hours. If swallowed, seek immediate medical attention. Never recharge non-rechargeable batteries. The integrated battery cannot be replaced by the user. Replacement may only be carried out by the manufacturer, customer service, or a similarly qualified specialist. When disposing, note that the product contains a rechargeable battery. Storage: Before storing, ensure the device is switched off and disconnected from the power supply. Store in a cool, dry place out of reach of children, where it is protected from damage.