Wavelength LED FACE MASK

Assembly instructions: Remove all mask parts from the packaging, including the remote control, eye pads, black straps, and LED mask. Place the eye pads on the mask so they fit snugly, using "r" for right and "l" for left. Thread the straps through the loops on the mask, with the long end of the strap resting on top and secured to your head. Plug the cable into the remote control head. The mask will not work if the remote control is not connected. To charge: Plug the USB-C cable into the top of the remote control and into a USB-C adapter. The battery symbol will appear when it is charging normally. If the remote control is not charging or does not turn on, a reset is necessary. Hold down both buttons for 20 seconds and immediately charge the remote control. The battery symbol should now be visible. If not, repeat the process. | Application: Place the assembled mask on your face and secure it to your head with the straps. Anti-aging mode: Hold down the power button on the remote control. Briefly press and hold the mode button to enter Target mode. Press the mode button again to enter Recovery mode. Press the mode button again to enter Balance mode. Wear the mask in your desired mode for 10 minutes. If you prefer a shorter session, you can turn the mask off by holding down the power button.

SAFETY INSTRUCTIONS: Important! Do not look directly into the light. Always place the eye pads securely on your face to minimize light exposure to your eyes. LED light products are not intended to diagnose, treat, cure, or prevent any disease. Our products are low-risk, general wellness/fitness products that do not require a doctor's approval. Please conduct a spot test before use. They are intended for "general wellness" use at home only. The LED mask should not be used more than once per day at the same setting. After using the mask, you can apply moisturizer or other skincare products as part of your routine.
SAFETY INSTRUCTIONS: Using the LED light therapy mask in any manner other than that described in this manual will void the warranty and may result in serious injury.
The Wavelength LED Face Mask is an electrical device. To avoid electric shock, please observe the following safety instructions:
- Do not wet the device or immerse it in water.
- Do not wash the electrical part with water or liquids.
- Do not touch the device or switches directly with wet hands.
- Do not use the device on wet or damp skin.
- Do not pull, carry, or lift the device by the cable. If the cable is damaged, do not use the device.
- Do not use the device if it has been dropped, left outdoors, or has come into contact with water or liquids.
- Do not use the device on or near heated surfaces.
- Do not modify or attempt to repair the device. There are no user-serviceable parts.
- Do not store or use the device at temperatures of 54°C (130°F) or higher.

Important Safety Instructions: When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions before using the appliance. Keep these instructions. Keep the appliance away from water. This product is not a toy. Do not look directly at the lights. Use indoors only. For household use only. Do not attempt to open the back of the appliance. Consult a specialist if necessary. Keep away from direct heat sources and sunlight. Keep out of reach of children.
Danger: To reduce the risk of electric shock: Always turn off the appliance before cleaning or storing it.
WARNING!
To reduce the risk of burns, electric shock, fire, or injury to persons:
1. Read all instructions before use.
2. This product should not be used by children, pregnant women, patients with epilepsy, tumor or cancer patients, patients with pacemakers, or similar conditions. Do not use the mask if you have a known sensitivity to light or are taking medications that make your skin more sensitive to light.
3. Remove glasses, false eyelashes and contact lenses before use.
4. If you notice any skin changes during or after using the mask, please consult your doctor.
5. To protect yourself from electrical hazards, do not use the device while bathing or showering.
6. When an appliance is used by or near children or persons who are weakened or disabled by illness or injury, close supervision is required.
7. Do not use on sensitive or broken skin. Do not use on swollen or sunburned skin, or if you have any other skin conditions.
8. Do not operate the appliance if it malfunctions, has been dropped, or damaged in any way. Take the appliance to the nearest service facility for examination, electrical or mechanical adjustment, or repair. No attempt to repair by the consumer is permitted.
9. Use the tool only for the purpose described in this manual. The use of attachments not recommended by STYLPRO™ may be hazardous.
10. Do not use outdoors or in places where aerosol products (sprays) are used or where oxygen is administered.
11. Do not place the appliance near any heat sources such as radiators, stoves, etc., or on a soft surface such as a bed, as this may cause the appliance to overheat.
12. Keep the device away from corrosive liquids.
13. Make sure the device is turned off before storing.
14. Do not use the device in the bathroom or near water.
15. Do not place or store the appliance where it can fall or be pulled into a tub or sink.
16. Do not place or drop in water or other liquids.
17. If the device falls into water, do not reach into the water.
18. Check the device and remote control for damage before each use.
19. Do not pass the product on to other people.
20. Do not use the device while charging.
22. Keep your eyes closed during use to avoid exposure to the LED light. Do not look directly into the lights.
23. Consult a dermatologist or healthcare provider if you have sensitive skin, a history of skin conditions, or are unsure if this product is suitable for your skin type.