Assembly:
The LED mask is delivered pre-assembled. However, if one of the eye pads has come loose during shipping, you can proceed as follows:
Open the fasteners on the sides of the mask.
Insert the eye pads into the designated holes, paying attention to the markings "R" for right and "L" for left.
Once the eye pads are correctly inserted, close the top closure of the mask. Ensure the eye pads are securely in place.
Face:
Make sure the right and left straps are fastened and the eye pads are correctly positioned in the holes.
To adjust the size of the LED mask, use the face fasteners. Always start at the top and loosen the bottom fastener if necessary.
Place the LED mask on your face and fasten the straps firmly to your head.
Long press the power button to turn on the LED mask.
To ensure that the face function is selected, briefly press the power button until the “Face” symbol appears on the top of the remote control.
Use the "Mode" button to select the desired mode. An overview of the modes can be found below.
Perform the selected application for 10–15 minutes.
To turn the mask off early, press and hold the power button.
Neck, chest & back:
Open the fasteners and remove the eye pads while leaving the right and left straps attached to the mask.
Front of neck/chest: Place the mask on your chest and fasten the straps firmly at the back of your neck. Rest the mask on your collarbones and chest.
Back of neck/upper back: Place the mask on your upper back and fasten the straps at the front of your neck. Position the mask on your neck and upper back. Tip: For greater comfort, position the straps below your neck.
Press and hold the power button to turn on the mask.
To ensure that the “Neck, Chest & Back” function is selected, briefly press the power button until the “Neck” symbol appears on the remote control.
Use the “Mode” button to select the desired mode.
Perform the selected application for 12 minutes.
Premature shutdown by long pressing the power/function button.
Hair:
Open the clasps and remove the eye pads while keeping the right and left straps attached.
Clip fasteners into the hair attachments at the top of the mask so that the mask takes on a dome-like shape.
Turn the mask over so that the smaller STYLPRO logo is on top.
Place the mask on your head and fasten the straps at the back of your head/upper neck. Cover your front hairline.
Press and hold the power button to turn on the mask.
To ensure that the hair function is selected, briefly press the power button until the “Hair” symbol appears on the remote control.
Perform hair function for 15 minutes.
Premature shutdown by long pressing the power/function button.
Modes:
Face:
Mode 1 – Anti-Aging (12 min.): Red light (633 nm) and near-infrared (830 nm) stimulate collagen production and promote a more youthful skin appearance.
Mode 2 – Target Flare (15 min): Near-infrared light for 5 min, followed by a combination of near-infrared and blue (415 nm) for 10 min, soothes irritated, blemish-prone skin.
Mode 3 – Target Active (12 min.): Blue light to prevent blemishes and near-infrared to soothe, ideal for continuous care.
Mode 4 – Target Maintain (10 min.): Dynamic cycle of red, blue and near-infrared in T-zone pattern, for maintenance and balance.
Mode 5 – Recovery (15 min): Maximum near-infrared energy with a small amount of red light as an indicator, supports skin regeneration.
Mode 6 – Balance (15 min.): Transition between two patterns of red, blue and near-infrared, focusing on anti-aging for skin prone to blemishes.
Neck, chest & back:
Mode 1 – Neck Anti-Ageing (12 min): Red and near-infrared, supports collagen production and skin health in the neck and chest area.
Mode 2 – Neck Target (12 min): Blue + near-infrared, targets bacteria that cause acne in the upper back area.
Mode 3 – Neck Recovery (12 min.): Near-infrared + weak red light, has an anti-inflammatory effect.
Mode 4 – Neck Balance (12 min.): Combination of red, blue and near-infrared, for a balance between anti-aging and skin care for blemishes.
Hair:
Mode 1 – Hair Care (15 min.): Red light 655 nm and 633 nm, supports healthy scalp and hair growth.
